![]() Choose XBMC as the default dashboard.Īfter the installation you can put out the AID CD and boot the XBOX. Connect the scart to your tv and boot the XBOX from the auto installed deluxe (AID) CD.įollow the steps on screen, first make a MS Backup, so AID can copy all the necessary files to the XBOX, then choose the softmod option with virtual C drive. Now you can connect the newly build disk to the XBOX and connect the CD player again. You must wipe the disk completely and rebuild it and create a new key (option 6 or 7) The pc must boot from CD and start the XBOX HD Maker Linux Distribution. ![]() Then press on the spacebar to continue the boot process and the BIOS must recognize the XBOX disk. Now the disk is unlocked so we can flash that XBOX FATX DISK.Ĭonnect the IDE cable from the computer to the disk (primary master is the best, otherwise you can use the secondary master). Now you must connect a video/scart cable (a tv is not necessary but without the cable the xbox cannot start) and power on the XBOX, let the red light blink 3 times and then put the IDE cable from the XBOX hard disk as fast as possible. When you start the XBOX now you see a red light is blinking. Pull out the IDE cable from your XBOX DVD player. ![]() Remove the disk bay (screw are under the IDE cable) and remove the 4 disk screws. Then remove all the six tork screws (2 screws are under a sticker). Now remove the rubber feeds under the xbox. Start the pc and before the BIOS recognize the harddisk press the pause key. Put the XBOX HD Maker CD in the computer. Then disconnect al the IDE cables except the IDE CD player. XBOX1 component cable ( €6, free shipping coupon )įirst download and burn the XBOX HD Maker and Auto installer Deluxe to a CD or DVD.Second-hand XBOX1 with remote ( max €40).Screwdriver with a couple of tork plugs.Auto installer deluxe (4.5 or higher) (Download: ).
0 Comments
Leave a Reply. |